Detailed Product Description: |
BTC8200 explosion-proof cast light BTW6216 of explosion-proof Spotlights BC9500 Explosion-proof Floodlight
HBFC8200 explosion-proof Spotlights
Explosion-proof Spotlights Suitable place:
Oil field joint station, transit stations, drilling, wellsite workplace fixed lighting, oil shipping companies, such as explosion-proof requirements in the workplace
Ex Spotlights structural characteristics:
● BTC8200 explosion-proof Spotlights BTW6216 BC9500 explosion Spotlights flameproof highest level, working in a variety of flammable and explosive safety;
● efficient gas-discharge light source, high luminous efficiency, long life, the average life of up to 10,000 hours or more;
● BTC8200 explosion-proof Spotlights BTW6216 BC9500 explosion-proof Spotlights adopts imported light alloy materials, can withstand strong collision and impact;
● optimized structure design and sealing technology, waterproof and dustproof, can reliably in the harsh environment of environmental work;
● BTC8200 explosion-proof Spotlights BTW6216 BC9500 explosion-proof Spotlights small size, light weight, easy installation, can be used pedestal, wall-mounted, ceiling and other installation. Explosion-proof of BTC8200 explosion-proof Spotlights BTW6216 BC9500 Spotlights
Explosion-proof Spotlights use:
1, according to the site environment and lighting needs, determine the installation position of the lamp and ballast tank, ready two corresponding length of three-core cables, a lamp cable junction box connected to the lamp and ballast tank, the other is the power cable used to connect the ballast tank and the power supply.
2, open the ballast box cover, unscrew the ballast tank cable inlets compression nut lamps cable, power cable through the compression nut introduced into the ballast tank internal terminals at press The wiring diagram of the provisions of the line L1, L2 lines, ground connection fixed compression nut and tighten the ballast box cover, and then tighten the cable.
3, according to the installation of the lamp and ballast box is installed, then the other end of the power cable is connected to a 380V or 220V power.
4, unscrew the lamp bracket on both sides of the hex head mounting bolts can be adjusted in the range of 180 ° lighting irradiation angle (roughly adjusted by the dial on the bracket, optional red dot sight for accurate adjustment), achieve the required irradiation angle lamps on both sides of the fixing screws tighten.
5, replace the lamp, loosen the lamp cover four socket head cap screws, open the back cover, remove the lead terminal two screws that secure the lamp in the lamp holder and remove the bad bulb, the new lamp into the lamp holder and tighten the fixing screws, the rear cover.
Explosion-proof Spotlights precautions:
1, the installation of lighting, lamps bracket fixing screws tightened to prevent the use of the lamps in harsh conditions appeared loose and dangerous. Due to the high temperature of the lamp body, the lighting installation should be higher than 3m or should be installed in difficult to reach places.
The lamps use a higher temperature of Transparency center and shell lamps shall not touch, so as not to burn.
3, lamps use surface can not have any cover.
4, lamps can only be complete with a protective screen.
5, the shortest distance between the lamps and illuminated objects 7 meters, in order to avoid the fire.
Replace the lamp, not directly touch the bulb with your hands blister across the bulb only contact with porcelain handle, otherwise it will affect the light transmittance of the blister. If the surface of the blister has been smudged, the available industrial alcohol cleaning. (Such as the light source is just off, the lamp to cool sufficiently both to operate).
7, lamps external flexible cable or cord is damaged, the line to be replaced by the manufacturer or its service agent or a qualified person.
|