Detailed Product Description: |
[HFY LED energy-saving three-anti fluorescent LED Three-anti fluorescent ︱ three anti-LED fluorescent ︱ ︱ energy-saving LED fluorescent energy-efficient LED fluorescent
[HFY LED energy-saving three-anti fluorescent scope of application:
Widely used for the lighting of the oil, docks, chemical, food, pharmaceutical, warehousing, military, and other factories and enterprises, especially the dust of the workshop lighting.
[HFY LED energy-saving three anti fluorescent] Features:
The ① shell with gray anti-collision polycarbonate plastic, has a strong impact resistance, transparent cover with polycarbonate, with a high light transmittance. The shell material according to user requirements increase the flame-retardant and antistatic function.
The ② fastening the card lock together, open and close easily, ease of maintenance;
The ③ ballast for the energy efficient ballasts, high power factor;
(4) resistance to acid, alkali, salt, ammonia, corrosion, and more water, dust, corrosion grade WF2 protection rating of IP65;
The ⑤ exposed fasteners are high corrosion resistance of stainless steel, seals with silicone rubber, oil, acid, alkali, high temperature;
⑥ boom mounted side of the line and the progress line in two forms, regular for the side line form For more information about the progress line, please specify when ordering;
⑦ can be equipped with emergency equipment, emergency emergency lighting, emergency event not less than 90 minutes.
[HFY LED energy-saving three anti fluorescent] main performance:
So far (1) energy efficient LED luminous efficiency of the highest light, the same illumination than traditional light source, power-saving 50% -70% smaller power LED lamps to replace the traditional lighting of the larger power, to achieve the same lighting effect achieve the best choice for energy saving;
(2) Long life LED solid light, no filament to the fuse, electrode aging, and other defects, the average life span of 50,000 hours or more, is by far the longest life expectancy of the light, long-term maintenance-free use;
③ safe and reliable LED DC low voltage power supply, heat is much lower than traditional electric light, and does not produce the high-frequency electromagnetic field, the formation of electromagnetic interference on the peripherals; LED epoxy solid package, impact resistance, anti-vibration, is not easy broken;
Completely the ④ green LED emission spectrum in the visible light, ultraviolet radiation, no mercury, no heavy metal pollution; no filament to the fuse, broken glass, leakage of flammable and toxic substances and other environmental hazards.
[HFY LED energy-saving three-anti fluorescent parameters:
¤ Rated Voltage: AC220V 50 HZ
¤ is equipped with a light source: LED
¤ rated power: 8W × 1,12 W × 1,18 W × 1,8 W × 2,12 W × 2,18 W × 2
¤ Protection class: IP65
¤ corrosion grade: WF2
¤ cable outer diameter: φ8mm ~ φ12mm
[HFY LED energy-saving three-anti fluorescent installation and maintenance
◆ the introduction of the ring of the device should ensure that reliable fastened and cable clamp;
◆ lamps put into use within and outside the ground solid, reliable access to the user and site grounding system;
◆ lighting installation and maintenance, do not live to open;
◆ regular inspection of the sealing surface, such as the aging should be replaced;
The ◆ fluorescent emergency battery factory in the emptying state, and users before you use fully charged before use;
◆ fluorescent emergency battery shelved indefinitely, every 6 months to 1 to 3 times charge-discharge cycles.
[HFY LED energy-saving three-anti fluorescent] light source principle:
Visible from the fluorescent light-emitting mechanism, the quality of fluorescent lamp phosphors play a key role. The 20th century, 50 years after the fluorescent lamp mostly halogen calcium phosphate, commonly known as the halogen powder. Halogen powder cheap, but the luminous efficiency is not high enough, the poor thermal stability, the light fades greater lumen maintenance is low and therefore, it does not apply to the small diameter compact fluorescent lamps. In 1974, the Netherlands, Philips developed the first successful will be able to send sensitive to the human eye, red, green, and blue colored light phosphor yttrium oxide, multi-acid aluminum magnesium and aluminum magnesium barium into three color phosphor by mixing its luminous efficiency, color temperature of 2500K-6500K, color rendering index of 85, use it as a fluorescent material can be significant savings in energy, which is the reason behind the energy-efficient fluorescent. It can be said that the development and application of rare earth elements trichromatic phosphor is an important milestone in the history of the development of fluorescent. Three-color phosphor, it is impossible to have a new generation of small diameter energy-efficient compact fluorescent today. However, the rare earth elements trichromatic phosphor also has its drawbacks, the biggest drawback is expensive.
|