Detailed Product Description: |
BTC8200 explosion-proof cast light BC9500 explosion-proof of the BTW6216 explosion-proof Spotlights Spotlights
HBFC8200 explosion-proof Spotlights
The explosion-proof Spotlights Suitable place:
Oil field joint stations, transit stations, drilling, well site and workplace fixed lighting, Oil Shipping Company, the proof requirements of the workplace
The explosion-proof vote in the structural characteristics of the light:
● BTC8200 explosion-proof cast light BTW6216 BC9500 explosion-proof cast light flameproof highest level, work safety in a variety of flammable and explosive places;
Efficient gas-discharge light source, high luminous efficiency, long life, the average life of up to 10,000 hours or more;
● BTC8200 explosion-proof cast light BTW6216 BC9500 explosion-proof Spotlights imported light alloy material that can withstand the strong collision and impact;
● using the optimized structural design and sealing technology, waterproof and dustproof, can work reliably in harsh environmental environments;
● BTC8200 explosion-proof the Spotlights BTW6216 BC9500 explosion-proof cast light, small size, light weight, easy installation, operation and can be pedestal, wall, ceiling and other installation methods. BTC8200 explosion-proof cast light BTW6216 BC9500 explosion-proof Spotlights
The explosion-proof cast light use:
1, according to the circumstances at the scene and lighting needs, determine the installation location of the lamp and ballast box, ready two three-core cable of the appropriate length, a lighting cable to connect the lamp junction box and ballast box. a second power cable used to connect the ballast box and power.
2, open the end cap of the ballast tank, unscrew the ballast box cable into the mouth of the compression nut, lighting cable, power cable through the compression nut is introduced into the ballast tank internal terminals at press The wiring diagram of the provisions of the L1, L2 line, ground connection fixed, and then tighten the cable clamp nut and tighten the ballast tank end caps.
3, according to the installation of lamps and ballast tanks installed, and then the other end of the power cable is connected to the 380V or 220V power supply.
Loosen the lamp bracket on both sides of the hex head mounting bolts can be adjusted within the range of 180 ° lamp illumination angle (through a rough adjustment of the bracket on the dial, optional red dot sight for accurate adjustment), in lamps on both sides of the desired irradiation angle tighten the fixing screws.
5, replace the lamp, release the lamp cover four socket head cap screws, open the back cover, remove the two screws of the lead terminal of the fixed light bulb on the lamp holder, remove the bad bulb, new bulb into the lamp holder and tighten the fixing screws to secure the rear cover.
The explosion-proof cast light Note:
Install lighting the lamp on the bracket fixing screws tightened to prevent the use of the lamps in harsh conditions, to loosen dangerous. The higher the temperature of the lamp body, the lighting installation should be higher than 3m or should be installed in the local contact person is not easy.
, Lamps, transparent center and shell lamps high temperature, may not touch, so as not to burn.
3, lamp when in use the surface can not have any covering.
4, the lamps can only be complete with a protective screen to use.
5, when used, the shortest distance between the lamp and the illuminated objects is 7 m, in order to avoid the fire.
6, replace the lamp, not by hand directly touch the bulb blister, the only contact with the bulb at both ends of the porcelain handle, otherwise it will blister the light transmittance. If the blister surface has been smudged, available industrial alcohol cleaning. (If the light just goes out, should make the lighting sufficient cooling to operate).
7, if the lamps external flexible cable or cord is damaged, the line is to be replaced by the manufacturer or its service agent or a qualified person.
|