HBD313 miniature explosion-proof flashlight

Applicable places:

¤ Applicable to a variety of flammable and explosive places for mobile lighting.
¤ Applicable to grid electricity, railways, petrochemicals, oilfield and industrial and mining enterprises for inspections, maintenance and emergency mobile lighting.

Second, the product features:

¤ The flameproof proof the highest level, safe use of flammable and explosive places.

¤ Green light source using the fourth-generation of high-power, high brightness white LED reflector-tech surface treatment, reflective, high efficiency lamps irradiation distance up to 100 meters above the visual distance of more than 5,000 meters.

¤ Lighting, strobe and remote signal indication.

¤ High-energy battery without memory, large capacity, long life, low self-discharge rate, the economic environment; less energy light source, the service life of up to 100,000 hours.

¤ High hardness alloy casing, to ensure that it can withstand strong impact; waterproof and resistant to high temperature, high humidity performance, and can be used in a variety of harsh environmental conditions.

¤ The outer surface of the depth of anti-slip handle, light and beautiful, can be carried in the pocket, and easy operation.

¤ Lamps internal circuit design to prevent over charge, over discharge, short-circuit protection device and switch Misoperation function.

Third, using the method:

¤ Chang-ming; lamps tail switch can be realized is pressed again, the lamp off (Note: fast lamps did not respond when pressed); circulation press jog lighting can be realized.

¤ The lamp next to the tail switch with charging jack. Charging, simply plug the charger output corresponding inserted into the charging jack can.

¤ Charger built-in charging protection device. When insert lamp charger input of the power-charging jack, the light turns green, indicating normal charging will start; battery is fully charged, the indicator light is converted into the red.

¤ Once fully charged, can be used at any time in a year; prolonged, unused, added about four hours of charging every six months is better.

¤ The use of the process, when the battery is running out, the lamp brightness dramatically weakened, you should stop using and charging or put on the spare battery.

Warning:

? 1, charge or disassemble the lamps must be conducted in a safe place;

? 2, after each use should be promptly charging.

Fourth, note:

¤ In places with higher ambient temperature when charging or continuous discharge lamps surface a slight temperature rise, this is a normal phenomenon.

¤ Lamp head and tail of the charging port is open, you should try to avoid sediment and other blockage, the impact of charging and lighting; wiping the surface immediately after use in a corrosive environment or seawater.

¤ Maintenance of lamps must be professionals in a safe place.

?

V. Technical parameters:

, Quality assurance:

¤ The product in strict accordance with IS09001: 2000 international quality management system standard for quality control to ensure product quality is higher than the national standards fully meet the design requirements, since the purchase of three years, any failure of the product under normal use (non-human fault) maintenance free of charge by the company.

?