Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8782492
- Product Categories
- LED Explosion-proof lamp se..
- LED Industrial Lighting Ser..
- LED street lamp series
- Discharge lamp series
- Industrial Lighting Series
- Plant Explosion lamp series
- Mobile lighting series
- Fixed explosion-proof light..
- Explosion-proof electrical ..
- Anti-corrosion electrical s..
- Friendly Links
- Packaging, Paper companies
- Packaging, Paper products
- Packaging, Paper buy leads
- My business card
- China Business News
- My mobile shop
- Explosion-proof electri..
- Explosion-proof non-pol..
- Explosion-proof energy-..
- Explosion-proof fluores..
- LED High Bay
- LED mining lamp
- LED explosion proof lig..
- LED street lights
- Mobile lighting
- Industrial lighting
- Fixed lighting
- Honesty
- Quality first
- Low-carbon energy
- Honesty
- Efficient and environme..
- Histon electrical
- Yixing Vantage Electric..
Product Name: | Yulin Fuzhou LED explosion proof lights Explosion-proof lights lights BAD808LED |
Published: | 2015-05-22 |
Product Type: | BAD808 |
Product Description: | BAD808LED proof lights Explosion-proof lights lamp 50W 60W70W 80WLED Yulin Fuzhou LED explosion proof lights lights ◎ BAD808LED proof lights Scope ● 1 and Zone 2 IIA, IIB class T1 ~ T6 group explosive atmosphere, as factories or places lighting purposes. Explosion-proof lights work reliably under the following conditions ● altitude does not exceed 2000m; ● ambient operating temperature is -20 ~ + 40 ℃ :; ● ambient air relative humidity less than 98% (when the temperature is + 25 ℃); ● applies to Zone 1, Zone 2, II class T1 ~ T6 group explosive gas environment; ● without damage the metal and insulation properties of the gas and steam place; where ● in no significant shake and shock vibration; ● Pollution degree 3; ● Installation Category II class. ◎ BAD808LED proof lamp structure features ● Product Standard: GB3836.1 ~ 2-2010, Q / HH 001-2011. ● This product is aluminum alloy, after the high-speed shot blasting surface electrostatic spray, waterproof, dustproof, anti-corrosion and other functions. Stainless steel exposed fasteners, transparent parts are made of tempered glass against high-energy shock, lamp explosion of joints structure mouth only, but the light source chamber and the connecting chamber, drive chamber separated, easy installation and maintenance, and reliable electrical performance; high quality aluminum reflector cover, improve the efficiency of the lamp. ● The lamp has a ground screw inside and outside the shell, the user uses the product should be grounded. ◎ BAD808LED proof light technical parameters Explosion Proof Exd wall 30 ℃ II B T6 Gb rated voltage 220VAC 50Hz rated power 50W 60W 70W 80W LED light source type of protection IP65 Corrosion grade WF2 Dimensions Φ260 × H285mm installation pendant (G) ( b1) (x) fence type wall 90 ℃ (b2) Ceiling (f) method Columnar (h) ◎ BAD808LED proof lamp use and maintenance ● LED lights should be checked before installation of basic technical data listed on the nameplate is realistic conditions of use. ● There are equal to the diameter φ10mm ~ φ14mm cable entry through grommet into the access to the terminal, with the introduction of cable clamping nut pressed to make the seal, and prevents pull off. ● Before use, check the wiring is correct, the fastening screws (bolts) are secured to the housing. Cable grounding wire should be reliable grounding. ● maintenance "No live openings" and can not bump, damage rubber gasket. ● repair, if found to introduce seals, gaskets and other devices are aging, should be replaced, to ensure protective properties. ◎ transport and storage ● LED lights during transport, should prevent shock or strong vibration, and should have measures to prevent rain and snow. ● LED lamp should be stored in air circulation, no dripping water and liquid invasion, ambient temperature is not higher than + 40 ℃, not lower than -25 ℃, the air relative humidity less than 98% (+ 25 ℃) warehouse. ● LED lights surrounding the storage environment should not contain metal and damage the insulation of the corrosive gases. ◎ BAD808LED proof lamp quality assurance ● This product is strictly in accordance with IS09001: 2000 international quality management system standards for quality control to ensure product quality is higher than the national standards fully meet the design requirements within three years of purchase, any malfunction (non-human products under normal use failure) by the Company free maintenance. |
Admin>>>
You are the 980441 visitor
Copyright © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 980441 visitor
Copyright © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility