Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8782492
- Product Categories
- LED Explosion-proof lamp se..
- LED Industrial Lighting Ser..
- LED street lamp series
- Discharge lamp series
- Industrial Lighting Series
- Plant Explosion lamp series
- Mobile lighting series
- Fixed explosion-proof light..
- Explosion-proof electrical ..
- Anti-corrosion electrical s..
- Friendly Links
- Packaging, Paper companies
- Packaging, Paper products
- Packaging, Paper buy leads
- My business card
- China Business News
- My mobile shop
- Explosion-proof electri..
- Explosion-proof non-pol..
- Explosion-proof energy-..
- Explosion-proof fluores..
- LED High Bay
- LED mining lamp
- LED explosion proof lig..
- LED street lights
- Mobile lighting
- Industrial lighting
- Fixed lighting
- Honesty
- Quality first
- Low-carbon energy
- Honesty
- Efficient and environme..
- Histon electrical
- Yixing Vantage Electric..
Product Name: | BAD808-ELED proof lights BAD808-E BAD808-E BAD808-ELED proof lights Price |
Published: | 2014-08-01 |
Product Type: | BAD808-E |
Product Description: | BAD808-ELED proof lights ◎ Scope BAD808-ELED proof lights ● In a Zone 2 IIA, IIB class T1 ~ T6 group explosive atmosphere, as factories or places lighting purposes. BAD808-ELED explosion-proof lights lights under the following conditions can be reliably BAD808-ELED proof lights ● altitude does not exceed 2000m; ● operating ambient temperature is -20 ~ + 40 ℃ :; ● ambient air relative humidity less than 98% (when temperature at + 25 ℃); ● applies to a Zone 2, II class T1 ~ T6 group explosive atmosphere; ● No damage in metal and insulating properties of gases and vapors place; ● in the absence of a significant shake and shock Vibration place; ● Pollution Level 3; ● Installation Category II class. ◎ structural characteristics BAD808-ELED proof lights ● Product Standard: GB3836.1 ~ 2-2010, Q / HH 001-2011. ● This product is aluminum alloy, after high-speed blast cleaning surface electrostatic spray, waterproof, dustproof, anti-corrosion and other functions. Stainless steel exposed fasteners, transparent parts using high-energy impact resistant tempered glass, lamps for flameproof joints structure mouth only, but the light source and wiring chamber cavity, the cavity separate drive, easy installation and maintenance, and reliable electrical performance; using high quality aluminum reflector cover, improve the efficiency of the lamp. ● The lighting inside and outside the shell has a ground screw, users should be grounded using the product. BAD808-ELED technical parameters of explosion proof lights ◎ grade Exd II B T6 Gb rated voltage 220VAC 50Hz Rated Power 50W 60W 70W 80W 100W LED light source type of protection IP65 category WF2 Dimension Φ520 × 310 × 195mm mounting ceiling (x) Scaffolding (b) BAD808-ELED proof lights before use and maintenance ◎ ● LED lights installed are listed on the nameplate should be checked whether the basic technical data line with the actual conditions of use. ● There are the equivalent diameter φ10mm ~ φ14mm cable entry through the rubber seal on the introduction of connected terminals, will be introduced by the compression nut cable pressed to make the seal and to prevent pull off. ● Before use, check the wiring is correct, the fastening screws (bolts) are secured to the housing. Cable ground wire should be reliable grounding. ● When servicing "non-charged openings" and not bump, damage rubber gasket. ● repair, if found to introduce seals, gaskets and other devices are aging, should be replaced in order to ensure protection performance. ◎ transport storage BAD808-ELED proof lights ● LED lights in the transport process, should prevent shock or a strong shock, and measures should prevent rain and snow. ● LED lights should be stored in air circulation, no dripping water and liquid invasion, the ambient temperature is not higher than + 40 ℃, not lower than -25 ℃, air relative humidity less than 98% (+ 25 ℃) warehouse. ● LED lights around the store environment, should not contain metal and damage the insulation of corrosive gases. BAD808-ELED proof lights ◎ quality assurance ● This product is in strict accordance with IS09001: 2000 international quality management system standards for quality control to ensure product quality is higher than the national standards fully meet the design requirements within three years of purchase, any defective product under normal use ( non-human fault) free maintenance by the Company. |
Admin>>>
You are the 980441 visitor
Copyright © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 980441 visitor
Copyright © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility